Orgasol^Ò powder additives make cleaning easier. Specific Orgasol^Ò grades, with an average particle size from 5 to 60 microns, enable manufacturers to customize the ratio of particle size / thickness of polyurethane layer to create an easy-to-clean, non-slip texture.

Orgasol^Ò powder can also be used to create matte finishes with very low gloss. This gloss control property is of particular interest because, unlike most of the silica based products, Orgasol^Ò has no impact on the viscosity levels of 100% solids UV curable formulations, while improving abrasion, scratch and stain resistance.

Even in PVC flooring with a good initial resistance to abrasion and scratches, the use of Orgasol^Ò powder will improve performance, especially in high traffic areas, or where low gloss finishes are required.

Orgasol^Ò powder also improves stain and scuff resistance, especially when the average particle size (APS) of the polyamide powder is greater than the thickness of the polyurethane layer.

Orgasol^Ò powder is easily dispersed in polyurethane formulations, whether solvent based, water based or 100% solid UV/EB curable formulations.

Recommended grades:  Orgasol® 2002 ES 4 NAT3, Orgasol® 2002 ES 5 NAT3, Orgasol® 2002 ES 6 NAT3,  Orgasol® 2001 UD NAT 1 and Orgasol® 2001 EXD NAT1, Orgasol® 2002D NAT1

If you need further information on Orgasol^Ò powder properties in PVC flooring, please feel free to contact us.